| Stand
Alonelogic Analyzer Series
The LA series helps minimize you’re your project risk
providing the most reliable, accurate data capture and the
most complete view of system behavior. These profucts are
ideally suited for you on hardware/software debug, parametric
and mixed single testing and complex debugging. Moreover,
their compact size and ability to a PC makes them an ideal
solution for use at remote sites. |
| |
| Features:- |
 |
External (asynchronous) and internal (synchronous) capture:
Offer a more convenient environment for engineers. |
|
Provide
three sets searching data functions and six courser mark
to the trigger can be shown. |
|
Binary
code and hexadecimal list mode (state) display. |
|
Able to save the measuring data and waveform completely
in stand-alone mode. |
|
Offers I2C, SPI, UART etc signal decode function on PC
based. |
|
Provide various single trigger and capture: Pattern /
Edge / AND / OR, four kind of trigger mode. |
|
Pre-trigger, 3 level post trigger and continued trigger
functions make user operate more easily. |
|
Bus analysis and glitch capture functions. |
|
2M bytes ~ 4M bytes long memory depth; each CH memory
depth is up to 512Kbits ~ 1Mbits. |
|
The
adjustable sample rate size can be set by user, which
avoid capture time too long. |
|
Provide “Trigger Counter” and “Pulse
wide trigger” functions. |
|
High speed zoom In / zoom out technique. |
|
Smart
software provides text file for saving the binary code
of waveform, which loads MATLAB easily. |
|
Compact,
portable for engineers carr out debugging. |
|
5.6
inch TFT colour LCD display (LA-2025/ LA-2050). |
|
USB
2.0 interface for PC–base functions which can connect
with PC for user to save, analyse, view and printout. |
|
| |
| Application:- |
|
Development,
measurement and quality control for digital products. |
|
Electronic,
Electric machinery, Communication, Biotechnology and Medical
technology digital products. |
|
| |
| Physical
Specification:- |
| Timing
|
: |
250
MHz, Max 500 MHz |
| State |
: |
100
MHz, Max 200 MHz |
|
Bandwidth |
: |
100MHz
/ 200 MHz |
| Channels |
: |
32CH |
| RAM
size |
: |
2~4M
bytes |
|
Storage Depth per Channel |
: |
512K~1M
bits X 32 Ch |
|
Maximum Input Voltage |
: |
±
30V |
|
Threshold Range |
: |
-4V~
+4V |
|
Support PC-Link Function |
: |
For Win- 98/ 2k / XP |
| Data
Skew (Channel to Channel) |
: |
1~2ns
typical (4ns Max) |
| PC-Link
Interface |
: |
USB
2.0 |
| AC-In
AC |
: |
90~240V/50~60Hz |
|
Temperature |
: |
0°C~45°C
|
| Dimension |
: |
31(w)
x 15(h) x 9(d) cm |
|
Weight |
: |
3.8
Kg |
|
| Standard
Accessories:- |
| Main
Unit |
X |
1 |
Data
Pod |
X |
4 |
| Lead
Set |
X |
4 |
| Test
Probe |
X |
36 |
AC
power card |
X |
1 |
User’s
Manual |
X |
1 |
CD |
X |
1 |
USB
2.0 Cable |
X |
1 |
|
|
| |
| |
| |
| PC
based Logic Analyzer |
| |
 |
PLA
series (PC based logic analyzer) Provides digital software
and hardware designers to capture
and analyze the intangible signals and able to measure
the complex circuit precisely. Further more
the compact size and via USB ability to connect to a laptop
pc makes them an ideal convenient
solution for use at remote site. |
|
| |
| Features:- |
|
External (asynchronous) and internal (synchronous) capture:
Offer a more convenient environment for engineers. |
|
The timing of each courser mark to the trigger can be
shown. |
|
Provide
binary code and hexadecimal list mode (state) display. |
|
Able
to save the measuring data and waveform completely. |
|
Offers
I2C, SPI, UART etc signal decode function. |
|
Provide various single trigger and capture: Pattern /
Edge / AND / OR, Four kind of trigger mode. |
|
Pre-trigger, 3 level post trigger and continued trigger
functions make user operate more easily. |
|
Bus analysis and glitch capture functions. |
|
256k Bytes ~ 2M bytes long memory depth; each CH memory
depth is up to 128Kbits ~ 512Kbits. |
|
Able to set the sample rate size by the users which avoid
capturing time too long. |
|
Provide “Trigger Counter” and “Pulse
wide trigger” functions. |
|
High speed zoom In / zoom out technique. |
|
Smart
software provides text file for saving the binary code
of waveform, which loads MATLAB easily. |
|
Connect
to PC which able let the user to view, save, analyze,
printout the data. |
|
No
need extra power just connect to USB. |
|
| Applications:- |
|
Development, measurement and quality control for digital
product. |
|
Electronic,
Electric machinery, Communication, Biotechnology and Medical
technology digital products. |
|
| Physical
Specification:- |
| Timing
|
: |
100
MHz, Max 250 MHz |
| State |
: |
100
MHz |
|
Bandwidth |
: |
100MHz |
| Channels |
: |
16,
32CH |
| RAM
size |
: |
256K~2M
bytes |
|
Storage depth per channel |
: |
128K~512K
bits X 16Ch or 32 Ch |
|
Maximum input voltage |
: |
±
30V |
|
Threshold range |
: |
-4V~
+4V |
|
Support PC-Link function |
: |
For Win- 98/ 2k / XP |
| PC-Link
interface |
: |
USB
2.0 |
| Power |
: |
USB |
|
Temperature |
: |
0°C~45°C |
| Dimension |
: |
15(w)
x 8(h) x 3(d) cm |
|
Weight |
: |
220
gm |
|
| Standard
Accessories:- |
| Main
Unit |
X |
1 |
| Lead
set
16CH
32CH
|
X
X |
1
2 |
| CD
(PC link software & user manual)
|
X |
1 |
| USB
cable
|
X |
1 |
|
|
| |
